Roll Bar Cage Light / Whip Tab Mounting Bracket Horizontal Bar Clamp 1.75" Tube

Description

Roll Bar Cage Light / Whip Tab Mounting Bracket Horizontal Bar Clamp 1.75" Tube
Light / Whip Tab Mounting Bracket Clamp
DOM Steel Tubing - 1.75" Bar Horizontal
Listing is for ONE 1.75" Bar Clamps w/ SS Hardware
Whip Mount NOT Included!
Our 1.75"
Heavy Duty
fabricated tab round bar mounting clamp is made from DOM (Drawn Over Mandrel) mechanical steel tubing and hand tig welded for strength and good looks. They are finished off with a semi-gloss powder coat finish and feature all stainless steel hardware. We manufacture these right here in the U.S.A. Our clamps are machined on all surfaces including the inner diameter to ensure a nice fit.
These light / whip mounting clamps are designed to mount accessories on any bar that is in the horizontal plane. Example: your accessory will be 90 degrees in relation to the bar it is mounted on. See Pictures. We have design these mounting brackets to clamp on so you have the ability to install them anywhere that a tab or mount is needed. Mounting hole is 1/2" diameter.
These are some of the nicest and strongest clamps available. They feature recessed bolt holes for the cap screws and blind threaded holes on the mating side for a smooth clean look. The back side of the clamp is completely smooth, not only giving the clamp great looks, but this allows the tab to be welding to the clamp with a very clean look.
Listing is for ONE - 1.75" horizontal bar clamp to be used on 1.75" round tubing. Also available in 1.5", 2.0", 2.25" - See our other listings or email us.
**
Note: A question we get asked often
:
Q: Is there suppose to be a gap between the two clamp halves when installed?
A: Yes, these clamps are made for DOM tubing. This is the result of cutting tubing into two pieces, material is removed. This also insures you are able to get the clamp tight! If the clamp halves touch and bottom out, there is no guarantee you really have them tight!
MADE IN U.S.A - Made here in Southern California, USA.
Not a cheap over seas piece. Clamps come powder coated semi-gloss black...
Specifications:
Clamp I.D. = 1.75"
Clamp O.D. = 2.5"
Clamp Thickness = 3/8"
Clamp Width = 1.75"
Tab Mounting Hole = 1/2"
Tab Thickness = 1/8"
Applications:
All 1.75" (1-3/4") Round Tubing / Bar
All Factory or Aftermarket Cages Built with 1.75" Tubing
Factory Roll Cage Tubing Diameters:
(Reference ONLY - Check Your Ride!!!!)
Arctic Cat
Wildcat - 1.75"
Prowler (round aftermarket cage only)
Can Am
Commander Cage - 2"
Honda
Big Red - 1.625"
Kawasaki
Teryx
Perimeter - 1.875”
Top Crossbars - 1.75”
Teryx 4
Perimeter - 1.875”
Top Crossbars - 1.75”
Polaris
Ranger
Perimeter - 1.75”
Top Crossbars - 1.75”
Harness Bar & Rear Bumper Crossbars - 1.5”
RZR, S & XP
Perimeter - 1.75”
Top Crossbars - 1.75”
Harness Bar & Rear Bumper Crossbars - 1.5”
RZR 4 & XP 4
Perimeter - 1.75”
Top Crossbars - 1.75", 1.5" & 1.25"
Rear Harness Bar & Bumper Crossbars - 1.5”
Redline
Revolt - 1.25"
Riot - 1.50"
Yamaha
Rhino
Perimeter - 1.75”
Rhino Top Crossbars - 1.5”
** SEE OUR OTHER LISTINGS FOR OTHER MODELS:
ALSO AVAILABLE FOR ANGLED FRONT BARS AND VERTICAL BARS.
GREAT FOR LIGHTS, WHIPS OR OTHER ACCESSORIES.
Part # SSM-DOM-4-BC-HOR-175
Powered by SixBit's eCommerce Solution